getting two different walls to project and join

Tutorials on Sketchup and PlusSpec

Moderator: Daniel

getting two different walls to project and join

Postby apexbuilding » Fri May 27, 2016 5:24 pm

Hi,

I am having problem with getting two different wall types to join in order to create a loop.
for example, i have a standard brick veneer wall within the garage but need to change it to a double brick wall that situates the garage door at the face of the garage. how can this be achieved?
another situation is joining a veneer brick wall with a typical clad wall (commonly found on 2 story additions)?

any help would be much appreciated!

cheers, Matt.
apexbuilding
 
Posts: 2
Joined: Fri May 27, 2016 4:52 pm

Re: getting two different walls to project and join

Postby Grant » Mon May 30, 2016 1:03 pm

Hi Matt,

In short you can join the two wall together. Below is a link to a video. Watch it from the 5:55 mark.

https://www.youtube.com/watch?v=1lBO7Xj_hnQ

The main reason most people create a loop is to make the roof easier to draw, yet you can draw a simple face over your walls or any area to create a roof from face. Therefore in this situation there is no need to create a loop.
Kind Regards,
Grant
User avatar
Grant
Site Admin
 
Posts: 255
Joined: Thu Aug 08, 2013 1:50 pm

Re: getting two different walls to project and join

Postby Overmars » Fri Oct 27, 2017 4:23 am

Thanks for sharing Grant. Interesting video in its entirety.
Overmars
 
Posts: 1
Joined: Wed Oct 18, 2017 7:48 pm


Return to Tutorials

Who is online

Users browsing this forum: No registered users and 1 guest