Page 1 of 1

Re: Wall with sloping top like under a skillion roof

PostPosted: Tue Oct 20, 2020 4:14 pm
by Andrew
Hi, AusSketch You can do it inside the wall tool :wall-tool: , by choosing a Skillion or Gable wall. or you can do it manually using the :redefine-wall: tool. it is more accurate doing it inside the wall tool using raked or gable wall settings, here is the tutorial video https://youtu.be/toAA6jJMyME Or see instructions below:
raked ceilings , sloping skillion walls framing adn internal lining in PlusSpec and PlusDesignBuild.jpg
raked skillion or gable walls inside PlusSpec
raked ceilings , sloping skillion walls framing adn internal lining in PlusSpec and PlusDesignBuild.jpg (163.61 KiB) Viewed 23357 times

Re: Wall with sloping top like under a skillion roof

PostPosted: Mon Nov 29, 2021 3:27 pm
by Emily
Send walls to roof.jpg
This is new functionality that enabels you to send multiple walls and wall types to a sloping roof.
Send walls to roof.jpg (955.83 KiB) Viewed 15177 times


This works on sloping rooves, so if you need a gable draw it twice with teh sloping/skillion roof tool.

Here are the steps
1. draw multiple walls
2. draw a sloping/ skillion roof over the walls
3. Select both the walls and the roof
4. Right-Click the walls and roof and select extend walls to roof
5. Select if you want the cladding to go all the way to the roof or have it level.