Wall with sloping top like under a skillion roof

[Andrew]

Hi, AusSketch You can do it inside the wall tool , by choosing a Skillion or Gable wall. or you can do it manually using the tool. it is more accurate doing it inside the wall tool using raked or gable wall settings, here is the tutorial video https://youtu.be/toAA6jJMyME Or see instructions below:

raked skillion or gable walls inside PlusSpec

raked ceilings , sloping skillion walls framing adn internal lining in PlusSpec and PlusDesignBuild.jpg (163.61 KiB) Viewed 27080 times

[Emily]

This is new functionality that enabels you to send multiple walls and wall types to a sloping roof.

Send walls to roof.jpg (955.83 KiB) Viewed 18900 times

This works on sloping rooves, so if you need a gable draw it twice with teh sloping/skillion roof tool.

Here are the steps
1. draw multiple walls
2. draw a sloping/ skillion roof over the walls
3. Select both the walls and the roof
4. Right-Click the walls and roof and select extend walls to roof
5. Select if you want the cladding to go all the way to the roof or have it level.