Wall with sloping top like under a skillion roof

If you need help with information about PlusSpec please ask here

Moderator: Daniel

Re: Wall with sloping top like under a skillion roof

Postby Andrew » Tue Oct 20, 2020 4:14 pm

Hi, AusSketch You can do it inside the wall tool :wall-tool: , by choosing a Skillion or Gable wall. or you can do it manually using the :redefine-wall: tool. it is more accurate doing it inside the wall tool using raked or gable wall settings, here is the tutorial video https://youtu.be/toAA6jJMyME Or see instructions below:
raked ceilings , sloping skillion walls framing adn internal lining in PlusSpec and PlusDesignBuild.jpg
raked skillion or gable walls inside PlusSpec
raked ceilings , sloping skillion walls framing adn internal lining in PlusSpec and PlusDesignBuild.jpg (163.61 KiB) Viewed 8284 times
Andrew
 
Posts: 289
Joined: Thu Aug 08, 2013 1:30 pm

Re: Wall with sloping top like under a skillion roof

Postby Emily » Mon Nov 29, 2021 3:27 pm

Send walls to roof.jpg
This is new functionality that enabels you to send multiple walls and wall types to a sloping roof.
Send walls to roof.jpg (955.83 KiB) Viewed 104 times


This works on sloping rooves, so if you need a gable draw it twice with teh sloping/skillion roof tool.

Here are the steps
1. draw multiple walls
2. draw a sloping/ skillion roof over the walls
3. Select both the walls and the roof
4. Right-Click the walls and roof and select extend walls to roof
5. Select if you want the cladding to go all the way to the roof or have it level.
User avatar
Emily
PlusSpec Developer
 
Posts: 82
Joined: Sat Jul 12, 2014 8:27 pm


Return to Product Information

Who is online

Users browsing this forum: No registered users and 1 guest