Category Archives: Estimating

Supporting Our Friend: Builders Profits – Workshop

By | Construction, Estimating, News | No Comments

At PlusSpec, we know how important it is to connect industry, and support friends.

Builders Profits Logo_PlusSpec Partner

Our friends Builders Profits are offering a Workshop to help improve your success in 2017.
  If you have a business in the construction industry (in Australia or North America), and need help growing your business, then this Workshop by Builders Profits will help you get on track fast.
From the words of Builders Profits:
‘Discover the 5 fundamental steps that will make 2017 your best year you ever! This is an online workshop not a sales webinar and there will be a downloadable workbook sent to you 24 hours before the workshop.
Read More

Tilt panels and prefabricated concrete building components in Design, BIM, Estimating, CAD software

By | Architecture, BIM, Construction, Design, Estimating, manufacturers, PlusSpec, Sketchup, Sketchup for Construction & Estimating, Uncategorized, VDC | One Comment

Modular construction comes in many forms. Designing concrete prefabricated panels to suit transportation and load capacity of a crane can be a challenge. There are software packages that do this in a high LOD (level of detail), such as Tekla, which allows the addition of reinforcement and output of working drawings. In many cases this level of detail is not required at design conception and feasibility stages. In these cases software like Plusspec for SketchUp can be a great way to detail and pre-prepare for input into Tekla. The advantages of doing so become evident quickly, especially when it comes efficiency and cost calculation.

 

PlusSpec allows the creation of concrete walls in totality, yet it also has the ability to segment walls to suit manufacturing addition of voids/openings and transportation sizing. One of the many advantages is the output of quantities according to wall segments and connections.

 

The other benefit of PlusSpec is how you can output files. PlusSpec works inside of SketchUp, and for those who know Tekla structure would know that SketchUp files can be imported into Tekla very quickly and efficiently so that the BIM and virtual design and construction life cycle can be completed.

 

For more information visit: www.plusspec.com

The team at RubySketch recently worked closely with Brickwork’s new Pronto Panel system. Check out the construction details on the RubySketch library, which are FREE to download!

PlusSpec and Sketchup VDC BIM detail of pronto panel

We also recently released the Dincel Construction System in the wall tool inside of PlusSpec. So if you love using the Dincel Construction System, there is no better way to design &/or estimate with it!

Dincel Wall Tool

Is there a modular system that you would love to see inside of PlusSpec? Leave us a comment. We’d love to hear what you’d like to see!

Check out some photos from a recent visit to a well known manufacturer/vendor:

PlusSpec v16.3.3 Release Notes

By | Architecture, BIM, Construction, Design, Estimating, IFC, manufacturers, PlusSpec, Sketchup, VDC | No Comments

Minor Update (16.3.3):

This update includes the following improvements:

  • Fixed a thickness issue in the Joist & Ceiling Joist Tools.
  • Fixed Takeoff header naming errors.
  • Fixed a custom material thickness error and wall preview error for the Lightweight Multi-Skin Wall.
  • Fixed a Takeoff Export Excel issue with a forward slash (‘/’) in the layer name.

PlusSpec v16.3.1 Release Notes

By | Architecture, BIM, Construction, Design, Estimating, IFC, manufacturers, PlusSpec, Sketchup, VDC | No Comments

Minor Update (16.3.1):

This update includes the following improvements:

  • Updated splashscreen.
  • A new internal bifold door option (single & double) has been added.
  • Skirting enable/disable issue has been fixed.
  • Slab drawing issue has been fixed. Previously, if you tried to generate a slab from an edge/line made up of multiple segments, the slab would not have been formed correctly. This is no longer a problem.

PlusSpec v16.3.0 Release Notes

By | Architecture, BIM, Construction, Design, Estimating, IFC, manufacturers, PlusSpec, Sketchup, Uncategorized, VDC | 4 Comments

So what’s new in PlusSpec 16.3?

This update is packed with new tools and features that we know you’ll love. See the full notes below:

Interior design in 3D is now a reality! 

Introducing the most powerful and easy-to-use  Paint Tool EVER!  You now have a full color atlas, with 5040 named colors at your finger tips. WOW!

  • search color
  • add color
  • see color
  • quantify color

Find out more HERE.

Simply add your color selections to your model, or get your color consultant to do it for you!

 

Don’t forget you can view your PlusSpec models on your Android or Apple tablet or phone!

Ohhhh the joy of communication and technology with PlusSpec……

Paint Tool

Full range of Taubmans Paints for the Australian Material Library:

To coincide with the release of the new  PlusSpec Paint Tool, We have included the full Taubmans range of colours to the Paint Tool – with over 5040 colours to select from. This gives you the ability to apply paints/colours to just about anything inside of PlusSpec!

 

See how this will benefit you HERE.

Splash screen Update

Check out our new welcome screen. It’s the first thing you’ll see when you open PlusSpec.

It tells you when you need to update, and when your Material Library is out of date – so keep your eye on it!

 

We have also added links to all of our tutorials. If you have never used PlusSpec before, get started with our super easy Beginners Tutorials. They only take a minute and they will save you those D’oh! moments.

Learning BIM in Skethcup

Roof Tool improvements:

  • Now includes fascia options.
  • Now includes gutter options.
  • Boxed & raked eave options.
  • Plumb & angled fascia options.
  • Eave/soffit material can now be chosen.
  • Timber/lumber fascia option.
  • Fascia/barge materials for gables can now be chosen and enabled/disabled.
  • Reverse dutch gable option added to the ‘Edit Roof Pitch’ Tool.

 

Eave and Fascia Updates

Plumb Fascia & Boxed Eave

Raked Eave, Angled Fascia

Angled Fascia & Raked Eave

Reverse Dutch Gable

Edit Roof Pitch: Reverse Dutch Gable Option

Sloping/Skillion/Shed Roof Tool improvements:

  • Improved draw method: now each side of the roof will explain if the fascia will be plumb or angled;  if the fascia material will be removed; and if the overhang will be enabled/disabled.
  • Now includes fascia option.
  • Now includes gutter option.
  • Boxed & raked eave options.
  • Plumb & angled fascia options.
  • Eave/soffit material can now be chosen.
  • Timber/lumber fascia option.
  • Raked or flat ceiling option for insulation.

Skillion Shed Roof

Sloping/Skillion/Shed Roof Improvements

Skillion Shed Roof GIF

Wall Tool improvements:

  • When you draw a wall, you will now see a bold, black line. This line indicates which wall alignment has been nominated to draw from.
  • Help text will now appear as you draw walls. This will enable you to better understand which side of your wall is the external material, and which side of your wall is the internal material.
  • Raked ceiling option for internal lining (eg. plasterboard) has been added.
  • External wall reveals around windows and doors now have the wall material applied. Previously these reveals were shown white.

Wall Update: Exterior vs Interior

Wall drawing improvements: External vs Internal + Wall Alignment clarification

Section Hatching Tool improvements:

  • Stucco hatching option added.
  • Existing and Demolition hatching options added.

Section Hatching_existing vs demolition vs proposed

Section Tool Improvements: Existing vs Demolition vs Proposed

General Improvements

Slab Tool:

  • Slabs can now be drawn without a footing.
  • Construction details have been updated to make more sense.
  • Slabs and footings are now one object.

Ceiling Tool:

  • The ceilings now have a thickness.

Floor & Ceiling Joist Tools:

  • The joist direction will now determine the direction of the flooring.

Rafter Tool:

  • The ridge sizing error has been fixed.

Settings Tool:

  • More Takeoff units have been added: Materials & components can be imperial or metric in takeoff  (mm, cm, m, in, ft, yd).
  • The Search Materials feature has been improved to make it quicker and easier to use.
  • The ‘Create Similar’ option in the right-click menus has been added to more tools.
  • PlusSpec right-click menu items are now in capitals to make them easier to find/see.
  • An Arch window has been added to the Component Tool.
  • Updated splash screen and links to tutorials.
  • The ‘None’ option has been removed from some material fields.
  • General Performance improvements and upgrades.

Arch Window

New Arch window

Things you should know

TIPS & TRICKS

Are you regularly using the Sync Tool?

Once you have installed an update,  re-open PlusSpec and click the Sync Tool. You’ll get access to loads of new products that will make specification easier, and will transform the look of your designs.

Remember to click the sync tool every 2-3 weeks. This will ensure that you will always have access to the latest materials. Note: Your old materials will always be there for you. 

Previously drawn Walls

Because we have reconfigured the material libraries, if you want to edit a wall that you have drawn prior to this update, you may need to re-select some of the materials (eg. masonry).

 

Previously drawn Windows/Doors

When editing a model drawn prior to this update, some of your windows and doors glazing may turn opaque if you move a wall. If this happens simply select the windows/doors with the Window/Door Options tool > press submit.

 

Previously drawn Slabs

If you want to edit a slab that you have drawn prior to this update, you will be unable to right click and edit. To edit previously drawn slabs, left click the slab > select the slab tool > make required changes in the Slab Tool Dialogue.

Previous Update Reminder

Geo Located materials:

We want to remind you that in our last update, we added Geo Located Materials:

There is no point in building igloos in the desert as ICE can be hard to come by.Why specifying products that are not available or feasible to deliver?

 

PlusSpec has Geo located materials! This is a game changer. PlusSpec enables USA, UK & AU users to select national products. In Australia it can be done by State and territory.
It’s as easy as 1 2 3
geo located BIM content Australia, USA, United Kingdom

Don’t forget to change your location settings as materials are now geo located

Don’t have PlusSpec yet?

Click on your Profession below and see the benefits:

All or our updates are FREE to all PlusSpec Subscribers.

ARCHITECTS

Architects/Designers

Builder

Builders

Estimator

Estimators

What are you waiting for?

Get PlusSpec TODAY!

Don’t have your building products inside of PlusSpec yet?

Click here to see the benefits:

supplier

Manufacturers

Top